Wireless validating identity certificate
Step 4 Select the Wireless Networks tab, and then select the network from the bottom list.Select Properties once you locate the wireless network causing the error.WPA2 is supported as i can connect to WPA2 personal APs. During the connection it flashes that it "connected" for a second then goes to "Validating Identity" which it eventually timesout on.I am using the Windows Wireless Connection Manager. On a couple of occasions I've seen that particular AP (don't know what firmware) suddenly stop attempting to authnenticate clients (it never sends any RADIUS requests) and power-cycling the AP "fixes" the issue.I cannot get WPA2 enterprise to work on my network. Windows Domain, using IAS and its own CA Linksys WAP200 Access Point I setup the AP to use WPA2-Enterprise Mixed using RADIUS I setup and registered IAS on the domain controller.I added the AP as a client with and have tried using both RADIUS Standard and Cisco as the RADIUS type.Are you receiving an endless "Validating Identity" connection status when trying to connect to a wireless network.
Please refer to the documentation of your vendor's card in order to turn it off as this may interfere with the procedure here documented.I'd start by reviewing the event logs on your IAS server for reasoning as to why it's not authenticating your client.The below guide has been tested on MS Windows XP Professional and is based on Windows' default wireless configuration tool (Wireless Zero Configuration).In order to connect to eduroam network in future, simply bring up Wireless Network Connection window by double-clicking its icon in the tray bar , select eduroam network and click on Connect.If, for any reason, the connection turns to Manual, in order to re-connect, just bring up the available Wireless Network Connection window by double-clicking its icon in the tray bar , select eduroam and click on Connect.